Reassigning The Sunny Home Manager To The Sunny Portal System After The Reset - SMA sunny home manager Installation Manual

10 Troubleshooting
Procedure:
• Press the reset button with a sharp object (e.g.
paper clip) and hold until the desired reset
result has been achieved:
• To reset the network settings of the Sunny Home Manager, press the reset button until
the status LED and the energy consumption LED are intermittently flashing orange.
• To completely reset the Sunny Home Manager, press the reset button until the status LED
and the energy consumption LED are intermittently flashing red.
10.7 Reassigning the Sunny Home Manager to the
Sunny Portal System after the Reset
If you have performed a complete reset of the Sunny Home Manager (see Section 10.6,
page 75)), you must reassign the Sunny Home Manager to your Sunny Home Manager system in
Sunny Portal. Otherwise, Sunny Portal will not accept any data from the Sunny Home Manager.
You have the following options for reassigning the Sunny Home Manager to your
Sunny Home Manager system:
• Reassigning the Sunny Home Manager via the PV System Setup Assistant
or
• Reassigning the Sunny Home Manager via the Sunny Portal access (see the user manual
"Sunny Home Manager in Sunny Portal")
Reassigning the Sunny Home Manager to the Sunny Home Manager System
via the PV System Setup Assistant
Requirement:
☐ You must be the PV system administrator (for user roles and user rights, see the user
manual "Sunny Home Manager in Sunny Portal").
Procedure:
1. Open www.SunnyPortal.com and select [PV System Setup Assistant].
or
Go to www.SunnyPortal.com/Register.
☑ The PV System Setup Assistant opens.
76 HoMan-IA-en-20
SMA Solar Technology AG
Installation Manual