2 Safety
Damage to loads
Frequently switching a load on and off can damage it.
• Ask the load manufacturer whether the load is suitable for control via a radio-
controlled socket.
• Configure the radio-controlled socket so that the load connected is not switched on or off
more frequently than specified by the load manufacturer.
• Do not connect any loads to the radio-controlled socket if they require a continuous current
supply.
Damage to the radio-controlled socket
The radio-controlled socket can become damaged through incorrect operation.
• Do not operate radio-controlled sockets when they are plugged into each other.
Damage to the wall outlet
If the radio-controlled socket is operated in a wall outlet that is not suitable for the power of the
connected load, the wall outlet can become damaged.
• Only operate the radio-controlled socket in wall outlets that are suitable for the power of
the connected load.
14
HoMan_Portal-BA-en-20
SMA Solar Technology AG
User Manual