Configuring Radio-Controlled Sockets; Safety When Configuring Radio-Controlled Sockets; Requirements When Configuring Radio-Controlled Sockets - SMA sunny home manager User Manual

SMA Solar Technology AG
9.2

Configuring Radio-Controlled Sockets

9.2.1

Safety when Configuring Radio-controlled Sockets

Danger to life by switching medical devices
Unintentional switching of medical devices can result in life-threatening situations.
• Do not connect any medical devices to the radio-controlled socket.
Risk of injury and fire due to unintentional and unattended switching on of loads
Loads that are switched on via a radio-controlled socket unintentionally and while unattended can
cause injuries and fires (e.g. an iron).
• Do not connect any loads to the radio-controlled socket that could endanger persons or
cause damage if unintentionally switched on.
Damage to loads
Frequently switching a load on and off can damage it.
• Ask the load manufacturer whether the load is suitable for control via a radio-
controlled socket.
• Configure the radio-controlled socket so that the load connected is not switched on or off
more frequently than specified by the load manufacturer.
• Do not connect any loads to the radio-controlled socket if they require a continuous current
supply.
9.2.2 Requirements when Configuring Radio-Controlled Sockets
☐ The radio-controlled sockets must be registered in Sunny Portal (see Section 10.1, page 94).
☐ With SMA radio-controlled sockets: A BLUETOOTH connection to the Sunny Home Manager
must be available. A valid BLUETOOTH connection is indicated by the blue glowing, lower
horizontal LED of the SMA radio-controlled socket.
☐ In Sunny Portal, the data request interval must be set to Automatic (see Section 8.7,
page 69).
☐ You must be a Standard user, Installer or PV system administrator (see Section 13.1,
page 120).
User Manual HoMan_Portal-BA-en-20
9 Load Control
75