Activating/Deactivating Data Collection; Selecting The Load; Entering The Device Name - SMA sunny home manager User Manual

9 Load Control
9.2.3

Activating/Deactivating Data Collection

You can set whether or not the Sunny Portal is to collect data from the radio-controlled socket. If
you would like to control loads via the radio-controlled socket, you must activate data collection. If
you deactivate data collection, no radio-controlled socket data is displayed in Sunny Portal and
you cannot control any loads via the radio-controlled socket.
Procedure:
1. Call up the properties of the radio-controlled socket (see Section 8.2, page 66).
2. Select [Edit].
☑ The menu for setting the device properties opens.
3. To activate data collection, activate the checkbox Active.
4. To deactivate data collection, deactivate the checkbox Active.
9.2.4

Selecting the Load

In order that the radio-controlled socket can be controlled by the Sunny Home Manager, you must
assign a load to it. You will first need to create a load profile for the load (see Section 9.3,
page 79). If you have already installed a radio-controlled socket without assigning a load, you
can subsequently assign this radio-controlled socket to the required load when creating the load
profile.
Procedure:
1. Call up the properties of the radio-controlled socket (see Section 8.2, page 66).
2. Select [Edit].
☑ The menu for setting the device properties opens.
3. Select the connected load from the drop-down list Loads.
State of the radio-controlled socket after operation of the load or if the connection is
interrupted
Depending on the load type, the radio-controlled socket is either switched on or switched off
after load operation.
• Load is program-controlled: switched on
• Load is not program-controlled: switched off
The radio-controlled socket also switches to the respective state if the connection between the
Sunny Home Manager and the radio-controlled socket is interrupted for more than 15 minutes. In
this case you will need to reset the radio-controlled socket to the operating mode Automatic (see
Section 9.4, page 90) so that the Sunny Home Manager can continue to control the radio-
controlled socket.
9.2.5

Entering the Device Name

Using the device name, you can identify the SMA radio-controlled socket in the
Sunny Home Manager system.
76 HoMan_Portal-BA-en-20
SMA Solar Technology AG
User Manual