SMA sunny home manager User Manual page 55

SMA Solar Technology AG
Position Explanation
F
Details area
G Logbook area
* Not shown on the Total tab
Device Selection area
In this area, you can select whether the complete system and/or individual inverters are to be
displayed in the large diagram and in the Details area. Moreover, you can select whether
absolute or specific values are to be displayed.
Select devices
1. To display the values of the complete system, activate the checkbox Complete PV system in
the area Device selection.
2. To display the values of individual inverters, perform the following steps:
• Select the area Device selection .
☑ The area opens and the individual inverters are displayed.
• Activate the checkboxes for the desired inverters.
Tip: If you activate the checkbox Select all devices, the checkboxes for all inverters will
be activated.
Selecting the display type
• In the area Device selection, next to Display type, select the desired option:
– Absolute: Shows the system yield (kWh) or the power (kW).
– Specific: Shows the specific system yield (kWh/kWp) or the specific system power.
Tabs
Tab
Day
User Manual
Explanation
Diagram preview:
• Preview of diagrams with the progression of the PV system
yields for individual days
Tip: If you move the cursor over a day in the diagram, the total
yield of the PV system for this day is shown.
Large diagram:
• Power value curve as 15-minute mean values of the selected
devices for the selected day
• Bottom right in the diagram*: Total yield of the PV system for
the selected day
6 Page and Menu Selection
HoMan_Portal-BA-en-20 55