Setting Finishing - Konica Minolta BIZHUB 226 User Manual

5.1 Finishing setting (sorting, grouping)
5.1.2

Setting finishing

1
Load the original.
% For details on how to load the original, refer to page 3-12.
2
Press Finishing.
A screen that specifies the finishing appears.
3
Use +, to select [NON-SORT], [SORT], or [GROUP], then press OK.
The following icons are displayed in the basic screen.
%
%
4
Configure other desired settings.
% For details on the basic functions, refer to page 4-3.
% For details on the Application, refer to page 5-3.
5
Use the Keypad to specify the number of copies, then press Start.
% If you set the original on the Original Glass, the number of scans is displayed under [NEXT PAGE?]
and the number of copies. Set the next original and press OK. Repeat this operation the same
number of times as there are originals. When all pages have been scanned, press Start.
Tips
- If the optional Reverse Automatic Document Feeder DF-625 is not installed, [GROUP] will not be dis-
played.
bizhub 226
COPY FINISHING
: [SORT]
: [GROUP]
NON-SORT
SORT
GROUP
5
5-5