Stopping, Restarting, Or Erasing The Copy Job - Konica Minolta BIZHUB 226 User Manual

4.2

Stopping, restarting, or erasing the copy job

4.2 Stopping, restarting, or erasing the copy job
To interrupt the copy operation being performed, follow the below procedure.
1
Configure the copy settings and press Start.
Copying begins.
2
Press Clear/Stop when copying operations were being carried out.
The [Please wait] message appears and the job stops.
% To restart the stopped job, select [NO], then press OK.
% To erase the stopped job, select [YES], then press OK.
bizhub 226
4
4-7