Loading Paper; Loading Paper Into Tray1 - Konica Minolta BIZHUB 226 User Manual

3
3.4

Loading paper

This section describes how to load paper into each paper tray.
For the types of paper to be used, refer to page 8-3.
3.4.1

Loading paper into Tray1

1
Pull out Tray1.
1. Paper take-up roller
NOTICE
Be careful not to touch the surface of the paper take-up
roller with your hand.
2
Press down the lifter plate until it "clicks" into position.
2. Lifter plate
3
Load paper.
% Be sure to load the paper below the tab, so that the
stack height does not exceed the , mark.
4
Adjust the lateral guide to the size of the paper.
% Push the lateral guide firmly up against the edges of the
paper.
5
Reset the tray.
3-8
Loading paper 3.4
bizhub 226