Extended Operation Panel Mk-749 (Option) - Konica Minolta BIZHUB 226 User Manual

2
2.3.2

Extended Operation Panel MK-749 (Option)

For details on using Extended Operation Panel MK-749, refer to [User's Guide Fax] or [User's Guide Net-
work Scan].
No. Name
1 Fax
2
Scan
3 Copy
4 Auto RX Indicator
5 Memory TX
6
On Hook
7 Redial/Pause
8
Speed Dial
9
AddressBook
10 Switching Plate
11 One-Touch Dial Key
2-12
Functions
Press this key to switch to the fax mode.
The lamp lights up green when the machine is in the
fax mode.
Press this key to switch to the scan mode.
The lamp lights up green when the machine is in the
scan mode. (This function is only available when Net-
work Card NC-504 or Image Controller IC-209 is
installed.)
Press this key to switch to copy mode. The lamp
lights up green when the machine is in copy mode.
Lights up green when the machine is set in Auto RX
mode.
Press this key to configure a memory transmission.
This lamp lights up green when the Memory TX mode
is set to ON.
Press this key to set the machine in the state where
the phone is taken off the hook. Repressing this key
returns to the state to hang up.
• Press this key to redial the last recipient you
called.
• This function is available during the wait time to
make a call from an extension line to an external
line, or to receive information from an information
service.
Press this key to dial a fax number that has been pre-
registered in the speed dial.
Press this key to display the information registered in
the one-touch dial, group dial, and speed dial.
Use this plate to switch One-Touch Dial Key num-
bers. When the Switching Plate is closed down-
ward, one-touch dial keys 01 to 16 are available.
When it is opened upward, one-touch dial keys 17 to
32 are available.
• Press this key to dial a pre-registered destination.
• Use keys 01 to 32 to configure one-touch dial
key and group dial settings.
• Use keys 29 to 32 to configure program dial set-
tings.
Control Panel 2.3
Page
-
-
-
-
-
-
-
-
-
-
-
bizhub 226