6.7
COPY SETTING 1
6.7.12
Setting the erase width
1
Select [COPY SETTING 1].
% For details on selecting [COPY SETTING 1], refer to page 6-23.
2
Use +, to select [ERASE SETTING], then press OK.
3
Use +, to select [LEFT], [UPPER], or [FRAME], then press OK.
4
Enter the erase width using the Keypad, then press OK.
% You can set the erase width within the range from 4 mm to 20 mm.
% To correct the value, press Clear/Stop, and enter a new value using the Keypad.
This returns to the COPY SETTING 1 screen.
6.7.13
Setting a small size original
1
Select [COPY SETTING 1].
% For details on selecting [COPY SETTING 1], refer to page 6-23.
2
Use +, to select [SMALL ORIGINAL], then press OK.
3
Use +, to select [DISABLE] or [ENABLE], then press OK.
This returns to the COPY SETTING 1 screen.
bizhub 226
ERASE SETTING(LEFT)
10mm(4-20mm)
SMALL ORIGINAL
DISABLE
ENABLE
6
6-29