6.3
Tray Settings
6
Use +, to select the paper type, then press OK.
This returns to the Tray Settings screen.
6.3.4
Configuring settings for Tray2 to Tray5
1
Select [PAPER SOURCE SETUP].
% For details on selecting [PAPER SOURCE SETUP], refer to page 6-11.
2
Use +, to select a target tray, then press OK.
3
Use +, to select [INCH/METRIC], then press OK.
% For details on setting the unit of the paper size, refer to page 6-12.
4
Use +, to select [PAPER TYPE], then press OK.
5
Use +, to select the paper type, then press OK.
This returns to the Tray Settings screen.
bizhub 226
TRAY1 PAPER TYPE
PLAIN
RECYCLE
1-SIDE
SPECIAL
TRAY2
INCH/METRIC
PAPER TYPE
6
6-13