Selecting The Tray; Auto Tray Change Function - Konica Minolta BIZHUB 226 User Manual

4
4.3

Selecting the tray

1
Load the original.
% For details on how to load the original, refer to page 3-12.
2
Select Paper.
3
Use +, to select [AUTO] or one of the trays, then press OK.
The screen returns to the basic screen.
% By selecting [TRAY1] and pressing ), you can specify the size, unit, and type of paper.
% By selecting one of the trays from [TRAY2] to [TRAY5] and pressing ), you can specify the unit of
the paper size and paper type.
4
Configure other desired settings.
% For details on the basic functions, refer to page 4-3.
% For details on the Application, refer to page 5-3.
5
Press the Start key.
Tips
- If [NO SUITABLE PAPER] appears on the Display after you select [AUTO] and press Start, appropriate
paper is not loaded in the tray. Load paper of the appropriate size or select one of the trays, then press
Start again.
- The auto zoom setting and the auto paper setting, the manual zoom setting, the book separation copy
setting, or the ID copy setting cannot be selected at the same time.
4.3.1

Auto tray change function

If the currently selected tray has run out of paper during copying or printing, this function automatically
switches to another tray to continue copying or printing.
The auto tray change function operates when a tray other than the currently selected tray meets the following
conditions.
- When paper of the same size as that of the paper in the currently selected tray is loaded
- When paper of the same type as that of the paper in the currently selected tray is loaded
- When paper is loaded in the same orientation as that of the paper in the currently selected tray
- The type of paper loaded in each tray is [PLAIN], [RECYCLE], or [1-SIDE]
- By using the Bypass Tray and Tray2/Tray3/Tray4/Tray5, you can continuously copy or print a large
number of documents. To continuously copy or print a large number of documents, set the same con-
ditions above for all trays and load paper into them.
- If all trays have run out of paper, replenish paper according to the on-screen instructions. Even if you
load paper to a tray other than the tray displayed on the screen, copy or print operations may not re-
start.
4-8
PAPER SELECT
AUTO
TRAY1:INV
TRAY2:LTR
PAPER SETTING
Selecting the tray 4.3
bizhub 226