PROCEDURE TO BE FOLLOWED
- Switch on the electric bilge pump.
- If necessary activate the manual pump.
- Identify the source of the leak by tasting the water and decide on the relevant action to
be taken:
• freshwater = watertank leak.
• seawater = breach of hull.
ELECTRIC BILGE PUMP
Operation:
The electric bilge pumps are connected to the 12V service circuit. To enable operation the
12V circuit must be activated by turning on the battery switches.
You can energize the electric bilge pump from the instrument panel.
Electric bilge pump
Engine compartment
Capacity: 30 l / minute
BILGE PUMP SYSTEM
27/104
Electric bilge pump
Wheelhouse
Capacity: 30 l / minute
2