Table of Contents Electrical Reciprocating Saw USER'S MANUAL Thank you for purchasing this Electrical Reciprocating Saw. Before you start using it, please carefully read this user's manual and save it for possible future use. CONTENTS 1. GENERAL SAFETY INSTRUCTIONS .......................... 6 2.
The operation manual includes also instructions for operation, maintenance and repairs. The manufacturer does not take any responsibility for accidents or damages resulting from the failure to adhere to this manual. FDPO 200711-E...
Symbols 2. SYMBOLS The product complies with the applicable standards and regulations. Read the Instruction Manual attentively prior to use. Use ey es protective equipment Use ears protective equipment ELECTRICAL RECIPROCATING SAW USER’S MANUAL...
Remove all contents from the box and inspect to ensure no damage was incurred during shipping, and that the items listed below are included. Reciprocating Saw 2 saw blade Warranty card EC declaration Instruction Manual Should the components be missing or damaged, contact the dealer of the machine. FDPO 200711-E...
General safety instructions 4. GENERAL SAFETY INSTRUCTIONS Please read these safety instructions carefully, remember them and keep them in a safe place. WARNING! When using electric machinery and power tools, it is important to abide by and adhere to the following safety instructions for reasons of protection against injury caused by electric current, injury of persons and risk of starting fi...
Page 9
Using this type of tool is dangerous. Faulty switches must be repaired at a certifi ed service centre. Disconnect the tool from the power supply before you start setting, changing accessories or maintenance. This measure will prevent the risk of accidental start-up. FDPO 200711-E...
Page 10
General safety instructions Store unused power tools so that they are out of the reach of children and unauthorized persons. Power tools in the hands of inexperienced users can be dangerous. Store power tools in a dry and safe place. Keep power tools in good condition.
By increasing pressing the on / off switch (1), the speed increases. With the speed selection (3) in the ON / OFF switch (1), the desired speed can be selected. Turn toward +: higher speed Turn towards -: lower speed FDPO 200711-E...
Operational 6. OPERATIONAL ON/OFF switch (B3) To switch on: Press the ON/OFF switch (1) To switch off: Release the ON/OFF switch (1) Locking button (B3) You can lock the ON/OFF switch (1) using the locking button (2) when the equipment is in operation. To lock it, press the ON/OFF switch.
In case of excessive sparking, have the carbon brushes checked only by a qualifi ed electrician. IMPORTANT The carbon brushes should not be rep laced by anyone but a qualifi ed electrician. Maintenance There are no parts inside the equipment which require additional maintenance. FDPO 200711-E...
Disposal 9. DISPOSAL INSTRUCTIONS AND INFORMATION ON DISPOSING OF USED PACKAGING MATERIALS Dispose of used packaging material at a site designated for waste in your municipality. The appliance and its accessories are manufactured from various materials, e.g. metal and plastic. Take damaged parts to a recycling centre.