Table of Contents
Advertisement
Usage
Fig. 41
Removing the cross bolt
1 Cross bolt
6.13.3 Reducing the transportation size – Recaro® seat
To remove/install the Recaro® seat on the mobility base and
to fold the backrest down: see Page 48.
6.13.4 Preparing for transport
1) Position the power wheelchair in its transport location.
2) Turn the control unit off.
3) Engage the brake.
4) Use the eyebolts and cargo straps to attach the power
wheelchair to the means of transportation.
62 | Ottobock
2 Lever
Fig. 42
Front (left) and rear (right) eyebolts
6.14 Use in a wheelchair accessible vehicle
6.14.1 Safety Instructions
WARNING
Use as a seat in a wheelchair accessible vehicle
Risk of falling out of the power wheelchair, severe injury in
case of accident
► Always use the seats and restraint systems in the
wheelchair accessible vehicle first. This is the only way
to provide optimal protection for the occupants in case
of accident.
► Never transport more than one person in the power
wheelchair.
B500-S classic
Advertisement
Table of Contents
