Reducing The Transportation Size - Otto Bock 9B500-S CLASSIC Instructions For Use Manual

Table of Contents

Advertisement

Usage
► Only use sufficiently large hoisting devices to transport
the power wheelchair (see the "Technical Data"
chapter for the weight of the power wheelchair).
► Attendants may only lift the power wheelchair by solidly
attached components. Footrests or armrests may not
be used as lifting points.
WARNING
Improper transportation in aircraft
Burns, explosion or damage to the battery due to failure to
observe the rules for transportation
► Follow the IATA (International Air Transport Associ­
ation) rules when transporting the power wheelchair in
an aircraft. To this end, the fuse must always be
removed and the battery connectors must be insulated
so that they are short-circuit-proof prior to check-in of
the power wheelchair as luggage.
► Note that those batteries in particular which may leak
or will not be transported upright must be removed and
packaged so they cannot leak or short circuit.
► For more information please visit the www.iata.org
website. The manufacturer recommends contacting the
airline directly before every flight to obtain information
regarding special transport regulations.
60 | Ottobock
CAUTION
Securing the power wheelchair insufficiently during
transport
Risk of pinching, crushing, blows to body parts
► During transportation in vehicles, on lifting platforms or
in lifts, turn the control unit of the power wheelchair off
and lock the brake.
► The power wheelchair must be secured in accordance
with the regulations for the transport device.
► During transport in another vehicle, the power wheel­
chair must be secured sufficiently with cargo straps.
Only attach the cargo straps to the corresponding
transportation eyelets and specified tie-down points.
NOTICE
Improper transport
Risk of damage to the power wheelchair
► Ensure that the seat is lowered all the way and the
backrest is in a vertical position prior to loading and for
transporting the power wheelchair.
► Only use sufficiently large hoisting devices to transport
the power wheelchair (see section "Technical Data" for
the weight of the power wheelchair).

6.13.2 Reducing the transportation size

1) Flip the footrests up.
2) Remove the side panels.
B500-S classic

Advertisement

Table of Contents
loading

Table of Contents