Adjusting The Footrests - Otto Bock 9B500-S CLASSIC Instructions For Use Manual

Preparation for Use
Adjusting the armrest height
1) Loosen the Allen head screw on the side panel with a
size 3 Allen key (see Fig. 4).
2) Slide the armrests up or down to the desired position.
3) Tighten the Allen head screw.
Fig. 4 Allen head screw for height adjustment
Adjusting the armrest to the forearm length
1) Depending on the version, loosen 2 x Allen head screws
on the bottom of the armrest (see Fig. 5).
2) Adjusting the armrest:
→ Version 1:Push the armrest along the slotted holes
to the front or back into the desired position ((see
Fig. 5), left).
16 | Ottobock
→ Version 2: Slide the armrest with the spare tube for­
ward or backwards along the attachment rail to the
desired position ((see Fig. 5), right).
3) Tighten the 2 Allen head screws.
Fig. 5 Adjusting the armrest depth

5.3.4 Adjusting the footrests

INFORMATION
To remove and install the footrests: see Page 19.
Adjusting the lower leg length
CAUTION
Exposed pinch points
Pinching, crushing of fingers
B500-S classic