Xr-300M Eec Product Group; Xr-300M Eec Approvals, Certificates - Siemens SCALANCE X320-3LD FE Operating Instructions Manual

9.5

XR-300M EEC product group

9.5.1

XR-300M EEC approvals, certificates

Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
EC directives
SIMATIC NET products meet the requirements and aims of the following EC directives.
Low voltage equipment directive
Devices supplied with 100 to 240 VAC meet the requirements of the directive 2006/95/EC
"Electrical Equipment Designed for Use within Certain Voltage Limits" (Low Voltage
Equipment Directive). Conformity attested by compliance with the standard EN 60950-
1:2010.
EMC directive (electromagnetic compatibility)
The SIMATIC NET products described in these operating instructions meet the requirements
of EC directive 2004/108/EC "Electromagnetic Compatibility" for the following areas of
application:
Field of application
Industry
Personal injury and property damage can occur
The installation of expansions that are not approved for SIMATIC NET products or their
target systems may violate the requirements and regulations for safety and electromagnetic
compatibility.
Only use expansions that are approved for the system.
SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20
WARNING
Emission
EN 61000-6-4 : 2007
Approvals, certificates, standards
9.5 XR-300M EEC product group
Requirements
Immunity to interference
EN 61000-6-2 : 2005
249