Overview Of Xr-300M Eec Approvals; Xr-300M Eec Mechanical Stability (In Operation) - Siemens SCALANCE X320-3LD FE Operating Instructions Manual

Approvals, certificates, standards
9.5 XR-300M EEC product group
Result: A list of the available certificates is displayed.
9.5.3

Overview of XR-300M EEC approvals

Note
The 24 to 48 V variants do not have an E1 approval.
The 100 to 240 V variants have C-Tick and CE approvals, are only UL508 listed, have no UL
hazloc, FM or ATEX.
Table 9- 5 Overview of the approvals
Device Variant
XR324-4M 1 x 24 to 48 VDC, data
EEC cable outlet on front
2 x 24 to 48 VDC, data
cable outlet on front
1 x 100 to 240 VAC / 60 to
250 VDC, data cable outlet
on front
2 x 100 to 240 VAC / 60 to
250 VDC, data cable outlet
on front
1 x 24 to 48 VDC, data
cable outlet at rear
2 x 24 to 48 VDC,
Data cable outlet at rear
1 x 100 to 240 VAC / 60 to
250 VDC, data cable outlet
at rear
2 x 100 to 240 VAC / 60 to
250 VDC, data cable outlet
at rear
For temperature information "T.." or the maximum ambient temperature "Ta:..", refer to the type plate.
1
9.5.4

XR-300M EEC mechanical stability (in operation)

The devices of the SCALANCE XR-300M EEC product group meet the following standards
(prerequisite: rack mounted with 4 securing points):
● IEC 60068-2-6
(vibrations during transportation and operation)
Test parameters:
5 – 9 Hz: 3.5 mm
254
c-UL-us c-UL-us
Inf. Tech. for Hazardous
Eq. Locations
1)
● ●
● ●
- -
- -
● ●
● ●
- -
- -
c-UL-us FM C-TICK CE
1)
Ind. Cont.
Eq.
- ● ●
- ● ●
● - ●
● - ●
- ● ●
- ● ●
● - ●
● - ●
Operating Instructions, 05/2016, A5E01113043-20
ATEX95 Zone 2
1)
● ●
● ●
● -
● -
● ●
● ●
● -
● -
SCALANCE X-300