Scalance X-300 Declaration Of Conformity - Siemens SCALANCE X320-3LD FE Operating Instructions Manual

cULus approval for industrial control equipment
cULus Listed IND. CONT. EQ.
Underwriters Laboratories Inc. complying with
● UL 508
● CSA C22.2 No. 142-M1987
Report no. E85972
Note
Only variants with 100 to 240 VAC power supply meet the requirements of this approval.
cULus Approval Hazardous Location
cULus Listed I. T. E. FOR HAZ. LOC.
Underwriters Laboratories Inc. complying with
● UL 60950-1 (Information Technology Equipment)
● ANSI/ISA 12.12.01-2007
● CSA C22.2 No. 213-M1987
Approved for use in
Cl. 1, Div. 2, GP A, B, C, D T4
Cl. 1, Zone 2, GP IIC T4
Report no. E240480
Note
Only variants with 24 VDC power supply meet the requirements of this approval.
9.4.2

SCALANCE X-300 declaration of conformity

You will find the EC Declaration of Conformity for these products on the Internet at the
following address:
SCALANCE X-300 declaration of conformity
(https://support.industry.siemens.com/cs/ww/en/ps/15296/cert)
1. Click on the entry "SCALANCE X-300 managed" in the navigation panel at the top edge
of the window and from the drop-down list that opens, select the entry for your product
group.
2. Select the entry "Certificate" from the "Entry type"drop-down list.
Result: A list of the available certificates is displayed.
SCALANCE X-300
Operating Instructions, 05/2016, A5E01113043-20
Approvals, certificates, standards
9.4 X-300EEC product group
247