Installation
5.2 Installing a switch
Normal orientation
Normal orientation of the device
The LED display is on the left of the front panel of the hous-
•
ing.
The Ethernet ports or the slots for the modules are also on
•
the front of the housing. Slots for the modules are fitted with
dummy covers.
The C-PLUG is on the right behind a protective panel se-
•
cured with screws.
(For more detailed information, refer to the section on the C-
PLUG in the X-300 operating instructions.)
The ventilation grilles are on the top, bottom and sides of the
•
housing.
On the rear of the device, you will find the diagnostics port.
•
The grounding bolt and the connectors for the signaling
•
contact and power supplies are also on the rear of the de-
vice.
Note that there are different power supplies (see section
"XR-300M EEC product group (Page 32)").
118
SCALANCE XR324-4M EEC
SCALANCE XR324-4M EEC
Operating Instructions, 05/2016, A5E01113043-20
SCALANCE X-300