Rear Panel - Onkyo DV-CP706S Instruction Manual

Controls & Connectors—Continued

Rear Panel

1
A
ANALOG AUDIO OUTPUT
These RCA/phono connectors can be connected to
analog audio inputs on a hi-fi amp, or AV receiver.
B
REMOTE CONTROL
These (Remote Interactive) connectors can be
connected to the
Onkyo AV components for interactive control.
If you're using RIHD, do not connect anything to
these connectors.
C
OPTICAL AUDIO OUTPUT
This optical digital audio output can be connected to
an optical digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
D
COAXIAL AUDIO OUTPUT
This coaxial digital audio output can be connected
to a coaxial digital audio input on a hi-fi amp, AV
receiver, or surround sound decoder (Dolby Digital,
DTS).
E
HDMI OUT
This HDMI jack outputs digital video and audio and
can be connected to an HDMI input on a compatible
TV or other component.
F
VIDEO OUTPUT
This RCA/phono connector can be used to connect
a TV or projector with a composite video input.
G
S VIDEO OUTPUT
This connector can be used to connect a TV or pro-
jector with an S-Video input.
H
COMPONENT VIDEO OUTPUT
These RCA/phono connectors can be used to con-
nect a TV or projector with component video inputs.
I
AC INLET
The supplied power cord connects to this polarized
inlet. The other end of the power cord should be
connected to a suitable wall outlet. On the Austra-
lian model, the power cord is not polarized.
See page 19–22 for connection information.
14
2 3 4 5 6 7
connectors on your other
8 9