Calibration - Sartorius XQ 6100 Installation And Operating Instructions Manual

Calibration.

Have your scale checked and recalibrated, if necessary, by
your dealer on the basis of a regular maintenance schedule.
lf you have an accurate calibration weight (5,000 g ± 0.03 g;
see Sartorius "Accessories" on page 17), proceed as follows:
Remove the protective cap located on the front right of your
scale and slide the access switch (6) in the direction of the ar-
row.
Turn off the scale, hold down the TINTER/ADDITIVE key (4)
and briefly press the ON/OFF key (10).
Upon the completion of the self-test release
TINTER/ADDITIVE key when "C" is displayed.
Unload the scale and tare.
Press the TINTER/ADDITIVE key (4) when the display reads
zero. "CAL" and the calibration weight readout will now be
displayed.
15