Operation - Sartorius XQ 6100 Installation And Operating Instructions Manual

Operation.

Press the ON/OFF key (10) to turn the scale on or off.
The display will go out whenever you turn off the scale. All
other circuits will remain energized (STAND-BY state). This
means the scale is immediately ready to operate without re-
quiring warmup the next time you switch it on.
Important Note
To use the STANDBY feature, the scale must have been
plugged into the AC adapter for at least 30 minutes (initial
warmup).
After the scale is turned on, an automatic self-test of the
scale's electronic circuitry is performed. This self-test ends
with the readout 0.0 g.
Any other readout indicates an error. In this case, please con-
tact your dealer, describing exactly what the display reads
7