LifeSpan entertainer Owner's Manual page 20

burst clash
E02
No sensor signal
E03
Incline study failure
E04
Over loading protector
E05
System testing failure
E06
Out of safety lock
E07
24C02 message failure
E08
ENTERTAINER
2.Power supply voltage is
of shortage
1．Power tube is faulty
2．Drivers is faulty
3．Motor is failure
1.Sensor wire is faulty.
2． It is no use for the motor
magnetic.
3．Drivers is faulty.
1．Study failure
2. Incline motor is faulty.
3．Drivers is faulty.
4． Incline motor wire do not
connect well
1．The limited weight
2．Drivers in badness
3．Voltage is wrong
1．The machine is
interfered
2．Drivers badness
1．Safety lock badness
2．Computer badness
1．Data transfer failure
19
- -
2.To test the outside and the
inside voltage is normal.
（DC12V）
3. SCM is badness.
1．Change the power tube
2．Change the drivers
3．Change the motor
1．Change the sensor wire
2．Change the magnetic or
reset the magnetic
3．Change the drivers
1．To reset study
2．Change the incline motor
3．Change 24C02 or change
the drivers
4．Insert the incline motor wire.
1．Do not exceed the treadmill
user's maximum weight.
2．Change the limit
or change the drivers
3．Test the usage voltage is
measure up
1．Reset the treadmill
2．Change IGBT or change
drivers.
1．Change the safety lock
2．Test the iron piece of the
safety lock is dropped out or
change the computer.
1． Change 24C02
IC
resistance
EEPROM