Table of Contents
Advertisement
Advanced configuration
The NTC-40WV router comes with pre-configured settings that should suit most customers. For advanced configuration, log in to
the web-based user interface of the router.
To log in to the web-based user interface:
1.
Open a web browser (e.g. Internet Explorer, Firefox, Safari), type
The web-based user interface log in screen is displayed.
2.
Enter the login username and password. If this is the first time you are logging in or you have not previously configured the
password for the "root" or "admin" accounts, you can use one of the default account details to log in.
Note: To access all features of the router, you must use the root manager account.
For security reasons, we highly recommend that you change the passwords for the root and admin accounts upon initial
installation. You can do so by navigating to the System and then Administration page.
The Status page is displayed when you have successfully logged in.
NetComm Wireless NTC-40WV Industrial Indoor 3G Router with Voice
12
Figure 6 – Log in prompt for the web-based user interface
ROOT MANAGER
ACCOUNT
Username:
root
Password:
admin
Table 6 - Management account login details – Root manager
ADMIN MANAGER ACCOUNT
Username:
admin
Password:
admin
Table 7 - Management account login details – Admin manager
http://192.168.1.1
into the address bar and press Enter.
www.netcommwireless.com
Ver 1.4
Advertisement
Table of Contents
