Setting The Walk And Talk Mode - Siemens Gigaset SL 100 User Manual

Hide thumbs Also See for Gigaset SL 100:
Table of Contents

Advertisement

Using several handsets
Deactivating the room monitor remotely
Take the call from the room monitor and key in
deactivate around 90 seconds after the call ends. The room monitor will make no fur-
ther calls. The other room monitor functions on the handset (e.g. no ringer) will remain
activated until you press the display key
To reactivate the room monitor function with the same telephone
i
number, you have to turn on the activation again and save with

Setting the Walk and Talk mode

The Walk and Talk function allows two handsets to communicate with each other no
matter how far they are from the base station.
Example: You go on holiday and take two handsets with Walk and Talk functionality
with you. Set the Walk and Talk function on both handsets. You can now communicate
using the handsets.
Precondition:
Both handsets have been registered to the same base station or
Both handsets are registered to different base stations and both are set to Best
Base (page 70) or
One of the handsets is not registered to any base station and the registered handset
is set to Best Base or
Neither handset is registered to a base station.
Please remember:
The maximum range between handsets in Walk and Talk is 300 metres outdoors.
The handsets cannot be reached by incoming calls.
Walk and Talk mode severely reduces handset operating times.
78
9 ;
The room monitor function will
.
on the handset that is in the baby's room.
Off
.
Save

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gigaset sl 150

Table of Contents