Siemens Gigaset SL 100 User Manual page 50

Sending a text message to a personal mailbox
To send a text message to your personal mailbox, the sender has to know your ID and
enter it after your number. Send your SMS contact a text message. Your SMS telephone
number with the current ID will be sent automatically. The recipient can then store it in
his or her directory.
The message will not be delivered if the sender has used an invalid
◆
ID or the mailbox has been deactivated.
i
The message will go to your general mailbox if the sender has not
◆
entered the ID.
Changing the ID, name and PIN of a mailbox
You can change the PIN by overwriting the current entry. You cannot change the name
of the general mailbox.
v
¢ ¢
SMS Settings
Activated mailboxes are marked ‰.
either ...
s
R[RRRRRRRRRRRRRRRRRRRR]
Edit
~
R[RRRRRRRRRRRRRRRRRRRR]
Save
or ...
s
Mailbox 2
~
OK
s r
s r
s ~
[RRRRRRRRRRRRRRRRRRRRR]
Save
a
i
The general mailbox cannot be PIN protected.
¢
SMS Mailboxes
Changing the name of the mailbox:
Select the mailbox and press the display key.
Now enter the new name and press the display key
to store the entry.
Changing mailbox ID and PIN:
Select and confirm, e.g. Mailbox 2.
OK
If required, enter the mailbox PIN and confirm.
Scroll to the ID: line and select a new ID.
Scroll to the Protection: line and activate or deacti-
vate PIN protection.
Scroll to the PIN line (you will see the current PIN)
and overwrite the PIN (4-digit).
Now press the display key to confirm the entry.
Long press (back to idle status).
SMS (Text Messages)
49