Sub-Zero 400 Series Information Booklet page 83

700-3 SERIES - TALL UNITS
» Clearing Error Codes
1. Unit must be ON
2. Repair problem
3. Press and hold Bell ON/OFF key for 15 seconds
» Manual Component Activation Mode
(Energizes cooling system for 5 minutes)
1. Unit must be ON
2. Press desired COLDER & UNIT ON/OFF keys simultane-
ously for 10 seconds
NOTE: After performing the above key strokes (depending on
COLDER key chosen), the following will appear on the LCD.
Temperatures shown are for reference only, actual temperatures
may vary.
- - 1 1 8 8
Temperature of F (Freezer Evaporator)
OR
2 2 9 9
Temperature of rE (Refrigerator Evaporator)
SERVICE (Illuminated)
SERVICE (Illuminated)
PAGE 83
F F E E
rE E