Sub-Zero Manual
  1. Manuals
  2. Brands
  3. Sub-Zero Manuals
  4. Freezer
  5. Sub-Zero
  6. Manual

Sub-Zero Manual

Sub-zero freezer company, inc. freezer produc manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

INTERNATIONAL DESIGN GUIDE

Advertisement

Table of Contents
loading

Related Manuals for Sub-Zero Sub-Zero

Summary of Contents for Sub-Zero Sub-Zero

  • Page 1 INTERNATIONAL DESIGN GUIDE...
  • Page 2 ® SUB-ZERO is a registered trademark of Sub-Zero Freezer Company, Inc. The information and images in this guide are the copyright property of Sub-Zero Freezer Company, Inc. Neither this book nor any information...
  • Page 3 IMPORTANT NOTE: This highlights information that is especially relevant to a problem-free installation. Sub-Zero is breaking with conventional ways of offering Wine Storage for designers and their clients. Our Built-In and Integrated models, along with the free-standing Model I424FS, offer unlimited design and storage capabilities.
  • Page 4 B U I L T - I N R E F R I G E R A T I O N Sub-Zero’s Built-In line offers you the most complete set of design options in built-in refrig- eration for all of its models, from the beauty of the overlay models to the professional treatment of the wrapped stainless steel doors.
  • Page 5 B U I L T - I N R E F R I G E R A T I O N These illustrations represent the full line of Sub-Zero Built-In models shown in the stain- less steel design application with heavy-duty grille.
  • Page 6 Sub-Zero dealer. Dual Refrigeration System. All Built-In combina- tion models have the Sub-Zero dual refrigeration system, which ensures the freshest food and energy efficiency at the same time. You have precise independent control of the refrigerator and freezer compartments.
  • Page 7 Available Egg Container M O D E L I 6 0 1 R G A C C E S S O R I E S Contact your Sub-Zero Dealer Side panels in white and classic stainless steel Full-length framed handles Decorative overlay handles 90˚...
  • Page 8 All models are shown in the stainless steel design application. M O D E L I 6 1 1 O V E R - A N D - U N D E R M O D E L O P T I O N S Overlay Design I611/O Classic Stainless Steel...
  • Page 9 Sub-Zero dealer. A C C E S S O R I E S Contact your Sub-Zero Dealer Side panels in white and classic stainless steel Panel, louvered or stainless steel grilles in 25 mm increments from...
  • Page 10 M O D E L I 6 6 1 S I D E - B Y - S I D E M O D E L O P T I O N S Overlay Design I661/O Classic Stainless Steel I661/S S P E C I F I C A T I O N S Overall Width 914 mm...
  • Page 11 M O D E L I 6 9 5 All models are shown in the stainless steel design application. A C C E S S O R I E S Contact your Sub-Zero Dealer Side panels in white and classic stainless steel Panel, louvered or stainless steel...
  • Page 12 A C C E S S O R I E S Contact your Sub-Zero Dealer 90˚ door stop kit—right or left hinge Dozen egg container with lid Slide-out stainless steel refrigerator bin Refrigerator drawer dividers Classic stainless steel side panel Free-standing kit—includes two...
  • Page 13 P L A N N I N G I N F O R M A T I O N Although the Sub-Zero Built-In line offers a wide range of designs and configurations, the basic planning considerations for all models have much in common.
  • Page 14 I N S T A L L A T I O N S P E C I F I C A T I O N S Refer to the All Refrigerator | All Freezer Models installation instruc- tions shipped with each Sub-Zero Models I601R and I601RG, which do not product for detailed have an ice maker, will not require the water specifications.
  • Page 15 Model I650G with Glass Door 610 mm I N S T A L L A T I O N Refer to the installation instruc- tions shipped with each Sub-Zero product for detailed specifications. 10 mm FRAME EXTENSION 90˚ 2127 mm...
  • Page 16 Dimensions are for finished rough openings. Refer to the Door swing clearances are based on installation instruc- stainless steel door and handle dimensions. tions shipped with each Sub-Zero product for detailed specifications. 1067 mm 1219 mm Model I685 Model I632...
  • Page 17 Built-In or Free-Standing I N S T A L L A T I O N Refer to the installation instruc- 914 mm " tions shipped with COPPER each Sub-Zero product for detailed specifications. SHUT-OFF VALVE LOCATE ELECTRICAL WITHIN SHADED AREA FLUSH...
  • Page 18 (wood block and hardware) provided A C C E S S O R I E S with each Sub-Zero Built-In model. Refer to the Built-In Installation Guide packed with the appli- Optional accessories...
  • Page 19 O V E R L A Y D O O R P A N E L S If you and your client have ordered an overlay design model, you will be adding panels to give the unit the custom Sub-Zero look. The overlay panel design option is available on all Built-In units except Models ICB648PRO and ICB648PROG.
  • Page 20 The decorative panel cannot be any larger or it may restrict the airflow to the compressor area and cause problems with the operation of the Sub-Zero unit. Routing Glasswell Required Cut-Out...
  • Page 21 If screws with thick heads are used, the screws will need to be countersunk into the door before the panel is put into place. IMPORTANT NOTE: Sub-Zero does not recom- mend using single pull knobs on any of its Built- In models.
  • Page 22 O V E R L A Y D O O R P A N E L S P E C I F I C A T I O N S All Refrigerator | All Freezer Overlay (O) Models Model I601R Refrigerator Overlay Panel 875 mm Refrigerator Spacer Panel...
  • Page 23 Built-In overlay (O) models. 1027 mm To install overlay 1003 mm panels, see the detailed procedures 1019 mm outlined in the Sub-Zero Built-In Installation Guide. 1180 mm 1156 mm 1172 mm 235 mm 211 mm 227 mm 260 mm...
  • Page 24 P A N E L A N D H A N D L E P R O F I L E – O V E R L A Y A N D S T A I N L E S S S T E E L A P P L I C A T I O N The full-scale illustration above shows handle placement for the standard stainless steel handle on the wrapped...
  • Page 25 130˚ door opening with a 51 mm filler strip. Interference of door panels with handles at maximum door swing may require the use of an optional 90˚ door stop available through your Sub-Zero dealer. SUB-ZERO UNIT DOOR CLOSED APPROX...
  • Page 26 90˚ DOOR OPENING (TOP VIEW) 606 mm TO REAR OF SUB-ZERO MAIN FRAME OVERLAY PANEL 19 mm THICK (NOMINAL) NOMINAL OVERALL WIDTH OF SUB-ZERO SUB-ZERO UNIT DOOR CLOSED HINGE DOOR OPEN @ 90˚ *Approximate thickness of wrapped stainless steel door.
  • Page 27 I N T E G R A T E D R E F R I G E R A T I O N For generations, the Sub-Zero name has been synonymous with built-in refrigeration. With the Integrated line, we‘ve taken the idea a step further—refrigerators and freezers you can hide...
  • Page 28 M O D E L I 7 0 0 T R A L L R E F R I G E R A T O R S P E C I F I C A T I O N S Overall Width 686 mm Overall Height...
  • Page 29 M O D E L I 7 3 6 T C I *Optional stainless steel panels and handles are ordered and shipped as sales accessories. A C C E S S O R I E S Contact your Sub-Zero Dealer Classic stainless steel front panels Tubular handles in classic stainless steel...
  • Page 30 (includes handles)* M O D E L I 7 0 0 B F I A C C E S S O R I E S Contact your Sub-Zero Dealer Front panels in classic stainless steel Tubular handles in classic stainless...
  • Page 31 Think about “point-of- use refrigeration” when planning where to place your units. Integrated Design. All Sub-Zero models are 610 mm deep. Tall Integrated units are 2032 mm high and are offered in two different widths—686 mm and 914 mm.
  • Page 32 This shut-off valve should not be installed behind the unit. Do not use self-piercing valves. A saddle valve kit (4200880) is available from your Sub-Zero dealer. An in-line filter is required when water conditions have a high sediment content. The ice maker operates on constant water pressure between 1.4 bar and 6.9 bar.
  • Page 33 O V E R A L L D I M E N S I O N S Models I700TR, I700TFI and I700TCI 686 mm TOP OF (UNIT DIMENSION) ROUGH 356 mm OPENING DOOR MOUNTING DETAIL 2032 1995 10 mm DRAWER MOUNTING DETAIL 518 mm FRONT VIEW...
  • Page 34 O V E R A L L D I M E N S I O N S Models I736TR and I736TCI 914 mm (UNIT DIMENSION) A L L R E F R I G E R A T O R Model I736TR All Refrigerator DOOR MOUNTING...
  • Page 35 SIDE VIEW 635 mm. I N S T A L L A T I O N Refer to the installation instruc- tions shipped with each Sub-Zero product for detailed specifications. 686 mm 876 mm 610 mm 686 mm...
  • Page 36 610 mm SUB-ZERO UNIT TO WALL CABINET FRAME...
  • Page 37 I N S T A L L A T I O N To install integrated panels, see the detailed procedures outlined in the Sub-Zero Integrated Installation Guide. 102 mm 610 mm SIDE VIEW...
  • Page 38 I N S T A L L A T I O N To install integrated panels, see the detailed procedures outlined in the Sub-Zero Integrated Installation Guide. SHADED AREA INDICATES STATIONARY STYLES AND RAILS 610 mm SUB-ZERO...
  • Page 39 F R A M E L E S S C A B I N E T R Y The illustrations show hypotheti- cal installations of Integrated base or tall units within frameless cabinetry. Review, giving particu- lar attention to the overall panel specifications.
  • Page 40 To install integrated panels, see the detailed procedures outlined in the 6 8 6 m m Sub-Zero Integrated W I D E M O D E L S Installation Guide. Panel width dimen- sions for installation of a 686 mm wide tall unit.
  • Page 41 When 19 mm or thicker panels are used and a reveal less than 6 mm is maintained, the door panels may cause damage to the Sub-Zero unit when the door is open at the maximum 105˚ stop. You should use the built-in 90˚ stop to prevent damage.
  • Page 42 BBDUAL for two base units or a base unit and a tall unit installed side by side. These optional components are available through your Sub-Zero dealer. CABINETS 686 mm 914 mm...
  • Page 43 Integrated unit is housed. 38 mm 3 mm DOOR PANEL FINISHED HEIGHT OF 2032 mm IS TO TOP OF SUB-ZERO MOLDING PANEL 424 mm PANEL 102 mm 67 mm...
  • Page 44 886 mm DOOR WIDTH FOR 914 mm MODELS SUB-ZERO DOOR LINE OF INTERFERENCE* SIDE MOLDING AND INSTALLATION HARDWARE PROVIDED BY SUB-ZERO 610 mm TO BACK LINE OF INTERFERENCE* OF UNIT *If the panel is thicker than 19 mm, it is recommended that you utilize the built-in 90˚...
  • Page 45 SUB-ZERO DOOR LINE OF INTERFERENCE* SIDE MOLDING AND INSTALLATION HARDWARE PROVIDED BY SUB-ZERO 1 0 5 ˚ M A X I M U M D O O R O P E N I N G 1/4 scale (top view) Adjacent side panel and countertop application.
  • Page 46 Sub-Zero products. The instructions can also be found on our website, subzero.com. W I N E S T O R A G E Sub-Zero‘s innovative addition to its complete line of residential refrigeration is wine storage 616 mm equipment—the ultimate in beauty, engineering, and attention to detail.
  • Page 47 279 mm heavy-duty grille, 25 mm diameter stainless steel handles and a stainless steel kickplate. Built-In Look. Sub-Zero offers you a host of design alternatives to choose from when select- ing the look you want. Wood or stainless steel, overlay or integrated.
  • Page 48 M O D E L I 4 2 4 U N D E R C O U N T E R B U I L T - I N M O D E L O P T I O N S Overlay Design I424/O Classic Stainless Steel...
  • Page 49 **Optional stainless steel panels and handles are ordered and shipped as sales accessories. A C C E S S O R I E S Contact your Sub-Zero Dealer Classic stainless steel front panels (Models I427 and I427R)* Tubular handles in classic...
  • Page 50 D U A L I N S T A L L A T I O N S If you are installing a Wine Storage unit next to an existing Sub-Zero unit, you may have to allow for a filler strip.
  • Page 51 O V E R A L L D I M E N S I O N S Undercounter Wine Storage 606 mm (CABINET DIMENSION) 597 mm DOOR FRAME 273 mm CENTERED DOOR VERTICALLY FRAME 102 mm FRONT VIEW 13 mm + _ ADJUSTMENT IN LEVELING LEGS M O D E L I 4 2 4 Built-In Width...
  • Page 52 O V E R A L L D I M E N S I O N S All Wine Storage – Model I427 686 mm 664 mm DOOR FRAME I N T E G R A T E D Model I427 All Wine Storage Model I427R Wine Storage |...
  • Page 53 610 mm Note the location of pre-drilled holes for optional handle hardware. I N S T A L L A T I O N Refer to the installation instruc- tions shipped with each Sub-Zero product for detailed specifications. 1918 mm...
  • Page 54 If you order a stainless steel unit, Models I424, I424FS and I430 will be shipped with their panels and hardware installed and you will merely install the Sub-Zero. However, for Models I427 and I427R, you will have to have the stain- less steel panels and handles installed.
  • Page 55 Door Frame Panel Weight Limit 5 kg Min Panel Thickness I N S T A L L A T I O N To install overlay panels, see the detailed procedures outlined in the Sub-Zero Wine Storage Installation Guide. 603 mm 764 mm 57 mm 16 mm...
  • Page 56 Integrated technique of are available through your mounting brackets. Sub-Zero dealer. Refer to the Overall Dimensions and Cabinetry Dimensions illustrations for Models I427 and I427R to give you a better idea of the exact space our unit needs and how the panel fits in relationship with the unit.
  • Page 57 TOE KICK 13 mm ADJUSTMENT IN LEVELING LEGS IMPORTANT NOTE: If you are installing Sub-Zero‘s optional lock kit on a Model I427 or I427R, you may have to order door panels that exceed the 2032 mm finished height. Consult the lock kit installation instructions and see if your panels will allow for an adequate installa- tion.
  • Page 58 O V E R L A Y P A N E L S – M O D E L I 4 3 0 Your overlay model will be shipped without handle hardware and with an 279 mm overlay panel grille as standard equipment. You will need to order a panel for the grille and hardware to complement your surrounding cabinetry.
  • Page 59 Also, the inside edges of the frames must be finished to match the front surface. As with the Sub-Zero Built-In models, you have the flexibility of ordering grilles in a variety of heights for the overlay application. Overlay grille panel dimensions for the overlay Model I430, standard 279 mm grille, are listed below.
  • Page 60 The metal frame on the door has numerous mounting holes on each side to accommodate Sub-Zero acces- sory handles. This will allow you to provide the A C C E S S O R I E S...
  • Page 61 D O O R F R A M E P R O F I L E 57 mm Rail/Stile This full-scale illustration is typical of the Model I424 door frame profile; details of the other Wine Storage door frames will vary slightly. W I N E S H E L F W O O D F A C I N G (WIDTH) FRONT VIEW...
  • Page 62 M O D E L I 4 2 4 – D O O R C L O S E D A N D 1 4 5 ˚ M A X O P E N I N G 610 mm CABINETRY OPENING 587 mm TO BACK OF APPLIANCE SUB-ZERO DOOR 19 mm DOOR PANEL 600 mm DOOR PANEL WIDTH The full-scale illustration shows what...
  • Page 63 N E W U N D E R C O U N T E R R E F R I G E R A T I O N Available in 2007 Aside from the full-size models that Sub-Zero offers in its Built-In and Integrated lines of refrig-...
  • Page 64 M O D E L U C - 2 4 R A L L R E F R I G E R A T O R S P E C I F I C A T I O N S Overall Width 606 mm Overall Height...
  • Page 65 Optional accessories are available through your Sub-Zero dealer. A C C E S S O R I E S Contact your Sub-Zero Dealer Classic stainless steel door front panel with tubular handle Classic stainless steel tubular handle for overlay application...
  • Page 66 You add the decorative door front panel and hardware. Sub-Zero accessories handles are available. The overlay application is available for all Under- counter models except Model UC-24RO. Model UC-24B must be ordered specifically as overlay (UC24-B/O).
  • Page 67 A minimum of 660 mm of copper tubing is required for the water line. Do not use self-piercing valves. A saddle valve kit (4200880) is available from your Sub-Zero dealer. An in-line filter is required when water conditions have a high sediment content.
  • Page 68 Refer to the installation instruc- tions shipped with each Sub-Zero product for detailed specifications. I N S T A L L A T I O N S P E C I F I C A T I O N S Model 315IP –...
  • Page 69 I N S T A L L A T I O N To install framed or overlay panels, see the detailed proce- dures outlined in the Sub-Zero Under- counter Installation Guide. Refer to the full- scale illustrations at the end of this...
  • Page 70 D O O R F R A M E P R O F I L E – M O D E L U C - 2 4 B F U L L - S C A L E T E M P L A T E S The full-scale illus- trations on the following pages...
  • Page 71 U N D E R C O U N T E R D O O R C L O S E D A N D 1 4 5 ˚ M A X O P E N I N G 610 mm CABINETRY OPENING 587 mm TO BACK OF APPLIANCE SUB-ZERO DOOR 19 mm DOOR PANEL 600 mm DOOR PANEL WIDTH The full-scale illustration shows what...
  • Page 72 SUB-ZERO, INC. P O BOX 44130 MADISON, WI 53744 USA SUBZERO.COM 7 0 0 1 8 7 1 2 / 2 0 0 7...

This manual is also suitable for:

Sub-zero i424Sub-zero i424fsSub-zero i427Sub-zero i427rSub-zero i430Sub-zero i601r ... Show all

Table of Contents