Sub-Zero 400 Series Information Booklet page 21

400-2 SERIES WINE STORAGE
» Clearing Error Codes
1. Unit must be ON and problem repaired
2. Press and hold Bell ON/OFF key for 15 seconds
» Manual Valve Activation Mode
(Energizes cooling system for 5 minutes)
1. Unit must be ON
2. Press desired COLDER & UNIT ON/OFF keys simul-
taneously for 10 seconds
NOTE: After performing the above key strokes (depend-
ing on COLDER key chosen), the following will appear on
the LCD. Temperatures shown are for reference only,
actual temperatures may vary.
5 5 1 1
Temperature of Lower Evaporator
OR
5 5 1 1
Temperature of Upper Evaporator
SERVICE (Illuminated)
SERVICE (Illuminated)
PAGE 21
L L E E
U U E E