Sub-Zero 400 Series Information Booklet page 119

» Clearing Error Codes
1. Unit must be ON
2. Repair problem
Press Freezer WARMER & COLDER keys simultane-
3a.
ously for 15 seconds (Model UC-24C ONLY)
Press WARMER & COLDER keys simultaneously for 15
3b.
seconds (Models UC-24B/R/RO ONLY)
» Manual Component Activation Mode
(Energizes cooling system for 5 minutes)
1. Unit must be ON
2. Press desired COLDER & POWER keys simultaneously for
10 seconds
NOTE: After performing the above key strokes (depending on
COLDER key chosen), the following will appear on the LCD.
Temperatures shown are for reference only, actual temperatures
may vary.
- - 0 0 2 2
Temperature of E (Evaporator)
OR
4 4 0 0
Temperature of r (Refrigerator Compartment)
UC SERIES
SERVICE (Illuminated)
SERVICE (Illuminated)
PAGE 119
F F
r