Sub-Zero 400 Series Information Booklet page 48

600 SERIES (Starting With Serial #1810000)
» Temperature Log Recall Mode
(Compartment Temperature History Only)
1. Unit must be ON
2. Press desired WARMER & UNIT ON/OFF keys simultane-
ously, then release both keys
NOTE: After performing the above key strokes (depending on
COLDER key chosen), the following will appear on the LCD.
Temperatures shown are for reference only, actual temperatures
may vary.
3 3 8 8
2 hour compartment temperature average (at left) with
index number. Number 1 is most recent 2 hour period.
NOTE: SERVICE is always illuminated at first index.
- Press WARMER key in multiple keystrokes to toggle up
through indexes, from 1 to 168.
3 3 6 6
2 hour compartment temperature average (at left) with
index number. Number 168 is oldest recorded 2 hour peri-
od.
- Press COLDER key in multiple keystrokes to toggle down
through indexes, from 168 to 1.
NOTE: Possible event indicators during Temperature Log Recall
Mode is covered later. Temperature Log Recall Mode ends 15
seconds after last key stroke.
SERVICE (Illuminated)
PAGE 48
0 0 1 1
1 1 6 6 8 8