Multi-Function Display; Description; Basic Mode - Yamaha WR250F 2016 Owner's Service Manual

MULTI-FUNCTION DISPLAY

EAS2GB7042
EWA
WARNING
Be sure to stop the machine before making
any setting changes to the multi-function
display.
The multi-function display is equipped with the
following:

BASIC MODE:

• Speedometer
• Clock
• Two tripmeters (which shows the distance
that has been traveled since it was last set to
zero)
RACE MODE:
• Timer (which shows the time that has been
accumulated since the start of timer measure-
ment)
• Tripmeter (which shows the accumulated
travel distance in timer measurement)
• Change tripmeter digits (capable of change to
any given ones)

DESCRIPTION

EAS2GB7043
Operation buttons:
1. Select button "SLCT 1"
2. Select button "SLCT 2"
3. Reset button "RST"
Screen display:
4. Tripmeter indicator
5. Tripmeter indicator
6. Timer indicator
7. Clock/Timer
8. Speedometer
9. Odometer/Tripmeter
TIP
The operation buttons can be pushed in the fol-
lowing two manners:
Short push: Push the button. (
Long push: Push the button for 2 seconds or
more. ( )
MULTI-FUNCTION DISPLAY
BASIC MODE
EAS2GB7044
Changing speedometer display (for U.K.)
1. Push the "SLCT2" button for 2 seconds or
more to change the speedometer units. The
speedometer display will change in the fol-
lowing order:
MPH  km/h  MPH.
Setting the time
1. Push the "SLCT1" button for 2 seconds or
more to enter the time setting mode.
2. Push the "RST" button to change the display
for time indication. The display will change in
the following order:
HourMinuteSecondHour.
TIP
The digits capable of setting go on flashing.
)
3. Push the "SLCT1" button (plus) or "SLCT2"
button (minus) and change the time. A long
push on the button will fast-forward the time.
1-22