Installing The Front Wheel - Yamaha WR250F 2016 Owner's Service Manual

3. Install:
• Collar "1"
TIP
Apply the lithium-soap-based grease on the oil
seal lip.
4. Install:
• Speed sensor "1"
TIP
Apply the lithium-soap-based grease on the oil
seal lip of speed sensor.
Make sure the two projections "a" in the wheel
hub are meshed with the two slots "b" in the
speed sensor.
a
EAS2GB7159

INSTALLING THE FRONT WHEEL

1. Install:
• Front wheel
TIP
Install the brake disc "1" between the brake
pads "2" correctly.
2. Install:
• Front wheel axle "1"
TIP
Apply the lithium-soap-based grease to the
front wheel axle.
3. Tighten:
• Front wheel axle nut "1"
ECA
NOTICE
Before tightening the front wheel axle nut,
push down hard on the handlebar(s) several
times and check if the front fork rebounds
smoothly.
1
b
LS
4. Tighten:
• Front wheel axle pinch bolt "1"
5-7
FRONT WHEEL
Front wheel axle nut
90 Nm (9.0 m·kgf, 65 ft·lbf)
Front wheel axle pinch bolt
21 Nm (2.1 m·kgf, 15 ft·lbf)
1