Checking The Valves And Valve Guides - Yamaha WR250F 2016 Owner's Service Manual

4. Remove:
• Valve spring retainer "1"
• Valve spring "2"
• Valve "3"
• Valve stem seat "4"
• Valve spring seat "5"
TIP
Identify the position of each part very carefully
so that it can be reinstalled in its original place.
2
4
5
CHECKING THE VALVES AND VALVE
EAS2GB7251
GUIDES
1. Measure:
• Valve-stem-to-valve-guide clearance
Out of specification  Replace the valve
guide.
Valve-stem-to-valve-guide clearance =
Valve guide inside diameter "a" -
Valve stem diameter "b"
Valve-stem-to-valve-guide clear-
ance (intake)
0.010–0.037 mm (0.0004–0.0015
in)
Limit
0.080 mm (0.0032 in)
Valve-stem-to-valve-guide clear-
ance (exhaust)
0.025–0.052 mm (0.0010–0.0020
in)
Limit
0.100 mm (0.0039 in)
1
3
VALVES AND VALVE SPRINGS
2. Replace:
• Valve guide
TIP
To ease valve guide removal and installation,
and to maintain the correct fit, heat the cylinder
head to 100 °C (212 °F) in an oven.
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Remove the valve guide with the valve guide
remover "1".
1
b. Install the new valve guide with the valve
guide installer "2" and the valve guide re-
mover "1".
Valve guide installation height "a"
Intake
10.8–11.2 mm (0.43–0.44 in)
Exhaust
11.2–11.6 mm (0.44–0.46 in)
6-24