INSTALLING THE BRAKE PEDAL
EAS2GB7234
1. Install:
• Spring "1"
• Brake pedal "2"
• O-rings "3"
New
• Bolt (brake pedal) "4"
Bolt (brake pedal)
26 Nm (2.6 m·kgf, 19 ft·lbf)
• Clip "5"
TIP
Apply the lithium-soap-based grease on the
bolt, O-rings and brake pedal bracket.
2
3
4
LS
INSTALLING THE DRIVE SPROCKET
EAS2GB7235
1. Install:
• Drive sprocket "1"
• Drive chain "2"
TIP
Install the drive sprocket together with the drive
chain.
2. Install:
• Lock washer "1"
• Nut (drive sprocket) "2"
Nut (drive sprocket)
75 Nm (7.5 m·kgf, 54 ft·lbf)
TIP
Tighten the nut while applying the rear brake.
ECA
1
5
New
NOTICE
Make sure to tighten to specification; other-
wise, it may damage the other part that is
fastened together.
3. Bend the lock washer tab to lock the nut.
4. Install:
• Drive sprocket guide
• Drive sprocket cover "1"
• Bolt (drive sprocket cover) "2"
Bolt (drive sprocket cover)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
2
INSTALLING THE EXHAUST PIPE AND
EAS2GB7236
MUFFLER
1. Install:
• Gasket
New
• Exhaust pipe 1 "1"
• Nut (exhaust pipe 1) "2"
Nut (exhaust pipe)
20 Nm (2.0 m·kgf, 14 ft·lbf)
TIP
First temporarily tighten all nuts to 13 Nm (1.3
m·kgf, 9.4 ft·lbf). Then retighten them to 20 Nm
(2.0 m·kgf, 14 ft·lbf).
6-9
ENGINE REMOVAL
1