2. Attach:
• Timing light "1"
• Digital tachometer "2"
To the high tension code "3".
Timing light
90890-03141
Timing light
YU-03141
Digital tachometer
90890-06760
Digital tachometer
YU-39951-B
1
3. Adjust:
• Engine idling speed
Refer to "ADJUSTING THE ENGINE
IDLING SPEED" on page 3-18.
4. Check:
• Ignition timing
Check whether the alignment mark "a" on
the left crankcase cover is within the firing
range "b" on the rotor.
Incorrect firing range Check rotor and
Crankshaft position sensor.
5. Install:
• Timing mark accessing screw
Timing mark accessing screw
6 Nm (0.6 m·kgf, 4.3 ft·lbf)
CHECKING AND CHARGING THE BATTERY
EAS2GB7133
Refer to "CHECKING AND CHARGING THE
BATTERY" on page 9-69.
REPLACING THE HEADLIGHT BULB
EAS2GB7134
EWA
WARNING
Since the headlight bulb gets extremely hot,
keep flammable products and your hands
away from the bulb until it has cooled down.
1. Remove:
• Headlight unit bolt "1"
TIP
After you have removed the headlight unit
bolts, lift and remove the headlight unit.
3
2
2. Remove:
• Headlight coupler "1"
• Bulb cover "2"
b
a
3. Remove:
• Headlight bulb "1"
3-40
ELECTRICAL SYSTEM
1
1
2
1
1