SIDESTAND
EAS2GB7039
This sidestand "1" is used to support only the
machine when standing or transporting it.
EWA
WARNING
• Never apply additional force to the sides-
tand.
• Hold up the sidestand before starting out.
STARTER KNOB/IDLE ADJUSTING SCREW
EAS2GB7040
Starting a cold engine requires a larger amount
of intake air, which is supplied by the starter
knob/idle screw "1".
Pulling the knob toward "a" turns ON the start-
er, resulting in a larger amount of intake air.
Pushing the knob toward "b" turns OFF the
starter.
EWA
WARNING
While handling the starter knob/idle screw,
take care not to burn yourself on exhaust
pipes.
b
a
1
1
1-21
CONTROL FUNCTIONS
FUEL TANK CAP
EAS2GB7041
Fuel tank cap "1" is located under the fuel tank
cap cover "2".
Remove the fuel tank cap cover to open the fuel
tank cap.
TIP
• To remove the fuel tank cap cover, insert fin-
gers under part "a", and then use both hands
to lift it up towards the rear of the vehicle.
• Install the fuel tank cap cover after placing the
bands "3" all the way in under the seat.
2
1
3
2
a