Yamaha WR250F 2016 Owner's Service Manual page 210

Table of Contents

Advertisement

TIP
Apply the lithium-soap-based grease on the
bearing and bearing race cover lip.
3. Install:
• Lower bracket "1"
TIP
Apply the lithium-soap-based grease on the
bearing, the portion "a" and thread of the steer-
ing stem.
LS
a
4. Install:
• Steering ring nut "1"
Steering ring nut
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
TIP
Install the steering nut with its stepped side "a"
facing downward.
Tighten the steering ring nut with a steering
nut wrench "2".
Refer to "CHECKING AND ADJUSTING
THE STEERING HEAD" on page 3-36.
5. Check the steering stem by turning this lock
6. Install:
LS
LS
7. Install:
1
TIP
• Temporarily tighten the pinch bolts (lower
• Do not tighten the pinch bolts (upper bracket)
8. Install:
5-56
STEERING HEAD
to lock. If there is any binding, remove the
steering stem and check the steering bear-
ing.
• Washer "1"
• Front fork "1"
• Upper bracket "2"
bracket).
yet.
• Steering stem nut "1"
Steering stem nut
145 Nm (14.5 m·kgf, 105 ft·lbf)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wr250fg 2016

Table of Contents