Table of Contents
Advertisement
NO.
ITEM
Brake and
clutch lever
13
pivot shafts
Brake pedal
14
pivot shafts
Sidestand
15
pivot
* Front fork
16
Shock ab-
*
sorber as-
17
sembly
Rear sus-
*
pension link
18
pivots
Control ca-
*
19
bles
Throttle grip
*
housing and
20
cable
Chassis fas-
*
21
teners
Battery
22
TIP
• The air filter needs more frequent service if you are riding in unusually wet or dusty areas.
• Hydraulic brake service
• After disassembling the brake master cylinders and calipers, always change the fluid. Regularly
check the brake fluid levels and fill the reservoirs as required.
• Every two years replace the internal components of the brake master cylinders and calipers, and
change the brake fluid.
• Replace the brake hoses every four years and if cracked or damaged.
CHECKS AND MAINTENANCE JOBS
• Apply lithium-soap-based grease (all-
purpose grease) lightly.
• Apply lithium-soap-based grease (all-
purpose grease) lightly.
• Check operation.
• Apply lithium-soap-based grease (all-
purpose grease) lightly.
• Check operation and for oil leakage.
• Replace if necessary.
• Check operation and for oil leakage.
• Replace if necessary.
• Apply molybdenum disulfide grease
lightly.
• Apply Yamaha chain and cable lube or
engine oil 10W-30 thoroughly.
• Check operation and free play.
• Adjust the throttle cable free play if
necessary.
• Lubricate the throttle grip housing and
cable.
• Check all chassis fitting and fasteners.
• Correct if necessary.
• Check terminal for looseness and cor-
rosion.
PERIODIC MAINTENANCE
INITIAL
600 mi
(1000
km) or 1
month
3-3
ODOMETER READ-
INGS
1800 mi
3000 mi
(3000
km) or 3
km) or 6
months
months
(5000
Advertisement
Chapters
Table of Contents
Troubleshooting
