Yamaha WR250F 2016 Owner's Service Manual page 239

1
2. Install:
• Clamp
• Exhaust pipe 2 "1"
• Bolt (exhaust pipe 2) "2"
2
TIP
Install and temporarily tighten the exhaust pipe
2 with its end positioned as shown with respect
to the exhaust pipe 1.
3. Install:
• Clamp
• Silencer "1"
• Bolt (silencer) "2"
Bolt (silencer)
30 Nm (3.0 m·kgf, 22 ft·lbf)
2
2
1
2mm (0.08in)
1
TIP
Install and temporarily tighten the silencer so
that its joint is positioned as shown with respect
to the exhaust pipe 2.
4. Tighten:
• Bolt (exhaust pipe 2)
Bolt (exhaust pipe 2)
20 Nm (2.0 m·kgf, 14 ft·lbf)
• Clamp
Clamp
12 Nm (1.2 m·kgf, 8.7 ft·lbf)
TIP
Tighten while checking that their front and rear
joints are inserted in position.
6-10
ENGINE REMOVAL
2
2
2mm (0.08in)