Introduction; Product Description; Why Do I Need An Operator's Manual - Ventrac LM600 Operator Manual & Illustrated Parts List

Accessories

Product Description

The LM520 and LM600 mowers were designed for the sole purpose of finish mowing. The LM520 features
a 52 inch (132 cm) cutting width, and the LM600 features a 60 inch (152 cm) cutting width.
The LM series mowers utilize a rugged all steel frame design which suspends the Ventrac's mower deck.
This design gives you a high efficiency grass discharge for a better quality of cut by moving more grass effi-
ciently through the deck tunnel. The mowers are equipped with a full widt h rear roller and wide pneumatic
front swivel tires that float over terrain independent of the power unit.
LAS, a unique Linear Adjustment System, provides cutting height selections between 1-1/2 and 3-3/4 inches
(3.8 and 9.5 cm). A single handle with a slight outward pull allows for a quick and easy change in cutting
height selection. A slide release allows the handle to be returned to deck level, preventing it from catching on
low branches and shrubs.
With the removal of two pins beneath the cross frame, the deck can be easily tilted to a near vertical posi-
tion for maintenance and storage.
All Ventrac LM finish mowers feature a full width rear roller for the ultimate in yard striping. These profes-
sional grade mowers are built to give you maximum performance and productivity.

Why Do I Need an Operator's Manual?

This manual has been created to help you gain the important knowledge of what is needed to safely
operate, maintain, and service your machine. It is divided into sections for convenient reference of the
appropriate section.
You must read and understand the operator's manual for each piece of Ventrac equipment you own. Read-
ing the operator's manual will help you become familiar with each specific piece of equipment. Under-
standing the operator's manual will help you, as well as others, avoid personal injury and/or damage to the
equipment. Keep this manual with the machine at all times. The manual should remain with the machine
even if it is sold. If this manual becomes damaged or unreadable, it should be replaced immediately. Con-
tact your local Ventrac dealer for a replacement.
When using a Ventrac attachment, be sure to read and follow the safety and operating instructions of both
the power unit and the attachment being used to ensure the safest operation possible.
The information in this manual provides the operator with the safest procedures to operate the machine
while getting the maximum use out of the unit. Failure to follow the safety precautions listed in this manual
may result in personal injury and/or damage to the equipment.

INTRODUCTION

V
enture Products Inc. is pleased to provide you with your new
Ventrac mower! We hope that Ventrac equipment will provide
you with a ONE Tractor Solution.
Listed below are just some of the items that can provide you
versatility as you use your LM520 or LM600. Please visit our
web site, or contact your authorized Ventrac dealer for a com-
plete list of items available for your new mower.
Item Description
LM520 Mulching Kit
Blade, RH Mulch (requires 3 per mower)
LM600 Mulching Kit
Blade, RH Mulch (requires 3 per mower)
Introduction - 6
ber
Part Num
39.35150
79.0057
39.35151
79.0051