Operational Controls; Operational Control Locations; Main Belt Tensioner (A); Height Adjustment Handle (B) - Ventrac LM600 Operator Manual & Illustrated Parts List

Operational Control Locations

B
A - Main Belt Tensioner
B - Height Adjustment Handle

Main Belt Tensioner (A)

Rotating the main belt tensioner clockwise until it
locks applies tension to the attachment drive belt.
Rotating the main belt tensioner counter-clockwise
releases tension on the attachment drive belt,
allowing the operator to remove or install the attach-
ment drive belt onto the power unit.
Release
tension

Height Adjustment Handle (B)

The height adjustment handle is used to raise or
lower the deck to achieve the desired cutting height.

OPERATIONAL CONTROLS

OPERATIONAL CONTROLS
A
Apply
tension
Operation - 16