Control Menu Structure - Martin Imager Series Operator's Manual

Control menu
structure
Default settings appear in bold.
Level 1 Level 2
Fixture DMX: 1-512 &
address (Adr) IR: 0-9
Profile (Pro) DMX-mode (d1)
DMX-mode (d2)
IR-remote "send"
(rCS)
IR-remote
"recieve" (rCr)
Stand alone Enable SA (run)
(SA)
SA Execution
(SAE)
Adjust (AdJ) Reset (rSt)
Lamp on (LOn)
Lamp off (LOF)
Intensity (Int)
Focus (Foc)
Gobo wheel
(gob)
66
Level 3 Effect (default = bold)
Select control address for both DMX
and IR profile
Set DMX mode (8-bit, tracking)
Set DMX mode (16-bit, tracking)
Set IR-remote control "send" mode
Set IR-remote control "recieve" mode
Off (OFF) Disable stand alone operation
On (On) Enable stand alone operation
Single fixture Fixture operates in isolation
(Sin)
Master (Snd) Fixture is set master for program
operation
Synchronized Fixture is set to synchronized
(Syn) program operation
Reset effects to home position
Turn lamp on
Turn lamp off
Open (OPn) Intensity 100%
Closed (CLO) Intensity 0%
Reset focus
(rF)
Near (nEA)
Far (FAr)
Reset gobo
(rg)
Gobo 1 (g 1)
Gobo 4 (g 4)

Control menu structure