Fixture Information; Reset Functions Or Effects; Reset Factory Default Settings; Effect Home Position Adjustment (Offset Menu) - Martin RUSH MH 1 Profile User Manual

Fixture information

Fixture operating hours counter
To see how many hours the fixture has been used:
1. Select FIXTURE INFORMATION and press ENTER to confirm.
2. Use the DOWN and UP buttons to select FIXTURE USE HOUR and press
ENTER to confirm. The number of hours will be shown.
Service countdown counter
This counter is resettable and can be used to monitor service intervals. The
counter is available under the FIXTURE INFORMATION→LIGHT USE HOUR
menu.
Firmware version
To see what software version is installed in the fixture:
1. Select FIXTURE INFORMATION and press ENTER to confirm.
2. Use the DOWN and UP buttons to select FIRMWARE VERSION and
press ENTER to confirm. The firmware version will be shown.

Reset functions or effects

The various effects—pan, tilt color, gobos, iris, focus, prism—or all effects, can
be manually reset to their home positions:
1. Select RESET FUNCTIONS and press ENTER to confirm.
2. Use the DOWN and UP buttons to select the function or effect that is to be
reset. Press ENTER.
3. Use the DOWN and UP buttons to select YES and press ENTER to
confirm (or press MENU to exit without saving any changes).

Reset factory default settings

The fixture's default settings can be restored using SPECIAL
FUNCTIONS→FACTORY SETTINGS.

Effect home position adjustment (Offset menu)

The various effects—pan, tilt color wheels, gobo wheels, gobos, iris, focus,
and prism—can lose or move out of their indexed home position. To reset any
of these:
1. In the menu structure, hold the ENTER button down for approx. 3 seconds
to enter the OFFSET MENU.
2. Use the DOWN and UP buttons to choose the function that needs to be
adjusted. Press ENTER to select it.
RUSH MH 1 Profile User Manual 21