Introduction; Safety Information - Martin Imager Series Operator's Manual

Introduction

Thank you for selecting the Martin Imager. The Imager is a series of
luminaires designed for high resolution projection of patterns, images, logos
and messages. Imager luminaires are dedicated projectors suited to low-
maintenance installations.
The Imager product range is made up of a number of luminaires and
accessories:
• Imager 04 DMX Gobo Wheel - a DMX controlled four-gobo projector
• Imager 01 DMX Gobo - a DMX controlled single gobo projector
• Imager Base - provides power to a single Imager luminaire
• Moving mirror for Imager
Imager luminaires use a 250W discharge lamp. Three available lens options
offer the choice of narrow, medium and wide beam angles. DMX control
enables remote focus and control of effects. For colored projections there is
a simple slot for easy-to-replace color filters.The Imager is also equipped
with a dimming system designed to create gentle fades and transitions.
The optional moving mirror provides programmable movement, useful for
roving logos or gliding messages. This attachment creates the possibility of
precise, smooth movement in a range of 235° of pan by 65° of tilt. Fixture
settings are controlled via a 3-digit control panel or with an optional infrared
remote control.
S a f e t y i nf o r m a t i o n
Warning! This product is for professional use only. It is not intended for
use in a dwelling.
This product presents risks of lethal or severe injury due to fire and heat,
electric shock, ultraviolet radiation, lamp explosion, and falls. Read this
manual before powering or installing the fixture, follow the safety
precautions listed below and observe all warnings in this manual and on the
fixture. If you have questions about how to operate the fixture safely, please
contact your Martin dealer or call the Martin 24-hour service hotline at +45
70 200 201.
6 Introduction