Fixture Control Menu - Martin Mania EFX500 User Manual

from one scene to the next). If you select tracking, the DMX controller
defines fade times.
Unsure about speed and tracking ?
Set the fixture to tracking if you are using programmed fade times or
macros on your DMX controller. Select an effects speed if you are not
using programmed fade times or macros on your DMX controller.
However, if you are using fade times on your controller and have set the
fixture to tracking, but effects movement is rough and irregular, setting
fade times on your controller to zero and selecting an effects speed may
give smoother movement.
Effects movement is set to 'tracking' if the fixture is in DMX mode 1 and by
default.
D MX si gn al in di cato r
When the Mania EFX
receives a valid DMX
DMX signal received
signal, the green Data
LED will light to show that
the fixture is receiving
control data.
Data LED
DMX Address
lit
X100 X10 X1 Mode
F i x t u r e c o n t r o l m e n u
You can change various personality settings by holding the [Mode] button
pressed in for 5 seconds and then using the buttons on the control panel.
Changing the DMX mode is described in "Setting DMX mode 1 or 2" on
page 16.
Inverting pan an d tilt for symmetrical action
You can create symmetrical action across multiple fixtures in
synchronized and DMX operation by inverting pan and/or tilt on some
fixtures so that they 'mirror' the action of others. When one fixture pans
left, for example, a fixture on the other side of the dance floor can bet set
to pan right.
Operation 19