Installing The Brake Pedal; Installing The Drive Sprocket; Installing The Exhaust Pipe And Muffler - Yamaha WR250F Owner's Service Manual

INSTALLING THE BRAKE PEDAL

EAS2GB2236
1. Install:
• Spring "1"
• Brake pedal "2"
• O-rings "3"
New
• Bolt (brake pedal) "4"
Bolt (brake pedal)
26 Nm (2.6 m·kgf, 19 ft·lbf)
• Clip "5"
TIP
Apply the lithium-soap-based grease on the
bolt, O-rings and brake pedal bracket.
2
3
4
LS

INSTALLING THE DRIVE SPROCKET

EAS2GB2237
1. Install:
• Drive sprocket "1"
• Drive chain "2"
TIP
Install the drive sprocket together with the drive
chain.
2. Install:
• Lock washer "1"
• Nut (drive sprocket) "2"
Nut (drive sprocket)
75 Nm (7.5 m·kgf, 54 ft·lbf)
TIP
Tighten the nut while applying the rear brake.
ECA
1
5
New
NOTICE
Make sure to tighten to specification; other-
wise, it may damage the other part that is
fastened together.
3. Bend the lock washer tab to lock the nut.
4. Install:
• Drive sprocket guide
• Drive sprocket cover "1"
• Bolt (drive sprocket cover) "2"
Bolt (drive sprocket cover)
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
2
INSTALLING THE EXHAUST PIPE AND
EAS2GB2238
MUFFLER
1. Install:
• Gasket
New
• Exhaust pipe 1 "1"
• Nut (exhaust pipe 1) "2"
Nut (exhaust pipe)
20 Nm (2.0 m·kgf, 14 ft·lbf)
TIP
First temporarily tighten nuts to 13 Nm (1.3
m·kgf, 9.4 ft·lbf). Then retighten them to 20 Nm
(2.0 m·kgf, 14 ft·lbf).
6-9
ENGINE REMOVAL
1