Included Parts; Spark Plug Wrench; Nipple Wrench; Handlebar Protector - Yamaha WR250F Owner's Service Manual

Hide thumbs Also See for WR250F:

Table of Contents

INCLUDED PARTS

The spark plug wrench "1" is used to remove or

install the spark plug.

The nipple wrench "1" is used to tighten the

Install the handlebar protector "1" so that the

notch "a" face backward.

INCLUDED PARTS

The fuel hose joint covers "1" are used to pre-

vent mud, dust, and other foreign materials

from entering the inside when the fuel hose is

disconnected.

COUPLER FOR CONNECTING OPTIONAL

The coupler "1" is used for connecting the op-

tional Power Tuner and so on.

When no optional parts, etc. are connected,

connect the connection terminal to the orig-

inal coupler.

Before disconnecting the coupler, thor-

oughly wipe off any mud or water stuck to it.

GYTR Power Tuner

YZ Power Tuner

(Except for USA)

The Power Tuner is an optional part.

33D-H59C0-V0-00

33D-859C0-10

Table of Contents